Marshall CODE 50 Manuel D'utilisation page 20

EDITING A PRESET
To edit PRE FX, AMP, MOD, DEL, REV, POWER and CAB section settings:
• Hold down the Section Switch that you
wish to edit (#15 - #21 in this manual).
• The display screen will then show the
current section's settings.
• Turn the EDIT selector to scroll through
the different options within the current
section: CL DSL, Plexi, JCM800, OD Silver
Jubilee in AMP, or Chorus, Flanger,
Phaser, Tremolo in MOD, or Studio,
Vintage, Multi, Reverse in DEL, for
example.
• Push the EDIT selector to begin editing.
Speaker cabinet models are not
!
editable.
• Turn the EDIT selector to edit the
highlighted parameter. You will see the
parameter value change on the screen as
you turn.
• When you are happy with your edited
parameter value, push the EDIT selector
to move to the next parameter (if there
is one).
STORING A PRESET
To store an edited Preset, Store an edited Preset to a new location, and to rename an
edited Preset:
• When you have finished editing, press & hold EXIT/STORE briefly until the Preset name
begins to auto-scroll to the left into the Preset number.
• If you wish to store your edited Preset to another location, turn the PRESET selector to
find a new location, then press & hold EXIT/STORE until STORED appears on the display
screen.
Be sure that you want to store to the Preset location that you have selected, as the Preset
!
in that location will be overwritten.
• Turn the EDIT selector to edit the newly
highlighted parameter.
• Repeat for all parameters and parameter
values of the Sections that you wish to
edit.
• When you are happy with your edited
Preset you can store it to your CODE
amplifier's memory.
To learn how to store an edited Preset,
!
refer to STORING A PRESET in this
manual.
• If you wish exit without storing your edits,
press EXIT/STORE (# 22 in this manual).
This will return you to the main Preset
screen.
If you wish to keep your edited settings
!
ensure that you store before moving off
that Preset.
ENGLISH