Gima ECG90A Manuel D'utilisation page 2

Please read the User Manual carefully before using this product. The operating
procedures specified in this User Manual should be followed strictly.This manual describes
in detail the operation steps which must be noted, the procedures which may result in
abnormality, and possible damage to the product or users. Refer to following chapters for details.
Failed to follow the User Manual may cause measuring abnormality, device damage or personal
injury. The manufacturer is NOT responsible for the safety, reliability and performance issues of
such results due to user's negligence of this user manual for using, maintenance or storage. The
free service s and repairs do not cover such faults either.
The content in this user manual complies with real product. For software upgrade and some
modifications, the content in this user manual is subject to change without prior notice, and we
sincerely apologize for that.
Attentions
Before using this product, the safety and effectiveness described in the following shall
be considered:
Type of protection against electric shock: class I (AC power supply), internal powered

equipment (power supplied by battery)
Degree of protection against electric shock: type CF, defibrillation-proof applied part

Working mode: continuous running equipment

Enclosure protection class: IPX0

Measurement results shall be described by professional doctor combined with clinical

symptoms.
The using reliability depends on whether the operation guide and maintenance instructions

in this user manual is followed.
Service life: 5 years

Date of manufacture: see the label

Contraindications: none

Warning: To ensure the device safety and effectiveness, please use the company
recommended accessories. The maintenance and repair of the device should be done by
professional personal specified by the company. It is forbidden to refit the device.
Responsibility of the operator
The device must be operated by a professionally trained medical staff, and kept by a

special person.
The operator should read the User Manual carefully before use, and strictly follow the

operating procedure described in the User Manual.
The safety requirements have been fully considered in product designing, but the operator

can not ignore the observation of the patient and device.
The operator is responsible for providing the information of product use to the company.

Responsibility of the company
The company supplies qualified products to user in accordance with enterprise standard.

The company installs and debugs the equipment and trains the physicians by contract.

Preface
I