Mounting The Frame Holder; Mounting The Bicycle Rack On The Trailer Tow Bar - EUFAB BIKE FOUR Manuel De L'opérateur

5.6 MOUNTING THE FRAME HOLDER

Undo the handle screw of the frame holder and rotate out fully. Open the cuff of the frame holder and place the inserts around the U-shaped bar at a position
suitable for your bicycle. Place the cuff around the inserts and push firmly together. Close the frame holder using the handle screw (but do not tighten).

5.7 MOUNTING THE BICYCLE RACK ON THE TRAILER TOW BAR

Make sure that the trailer tow bar is undamaged, clean and grease-free.
The bicycle rack is placed horizontally on the tow bar from above. Tighten the M16 screw slightly and align the bicycle rack parallel to the rear of the vehicle.
Now tighten the M16 screw in such a way to ensure that the rack is securely attached and can no longer be rotated. Screw the lockable handle screw into the
base until it touches. Turn the key to the lock symbol and remove. Now the rack is protected from theft.
5.8 MOUNTING THE BICYCLES TO THE CARRIER
The first bicycle is put into the first bicycle rail (the one closest to the vehicle). Align the protective rubber in accordance with your bicycle frame. Secure the
bicycle to the U-shaped bar using four short tensioning straps. The wheels are secured by pushing the stoppers up to the wheel and securing with the straps.
Caution: The front wheel must also be secured with a small tensioning strap to prevent it from turning.
The second bicycle is placed in the second rail, facing the opposite direction and secured to the U-shaped bar with the short frame holder. The wheels are secured
in the same way as for the first bicycle. The third bicycle is placed, facing the opposite direction to the second, into the third rail and secured with the long frame
holder to the U-shaped bar. The fourth bicycle is secured in the fourth rail facing the opposite direction to the third. With the frame holders, wheel to wheel,
connect the frame of the fourth bicycle to that of the third. The wheels are again secured in the same way as for the first bicycle. It may be necessary to arrange
the individual bicycles differently on the rack to ensure that the frame holders may be correctly secured. Now secure the bicycles with the long safety strap. Wrap
the safety strap through the bicycle frames and the U-shaped bar and tighten.
The bicycles are removed in reverse order
The bicycle rack may not be used without this safety strap
12
Regularly check the firm seating of the rack on the trailer tow bar as well as the functionality of the lighting systems.
Slight signs of pressure on the two bar ball are normal and do not influence the functionality.
Safety strap