Télécharger Imprimer la page

Teac AG-5D Manuel Du Propriétaire page 10

Publicité

DVD, CD, etc.
LINE OUT
TAPE
C
L
R
R
L
CENTER
FRONT
SURROUND
5.1CH AUDIO OUT
10
DIGITAL OUT
DVD, CD, etc.
DIGITAL OUT
A
B
L
L
R
R
LINE IN
DVD player or Decoder
Lecteur DVD ou Décodeur
Reprodcutor de DVD o
Descodificador
SUBWOOFER
Connection 1
CAUTION:
< Switch off the power to all equipment before making
connections.
< Read the instructions of each component you intend to use
with this unit.
< Be sure to insert each plug securely. To prevent hum and
noise, avoid bundling the signal interconnection cables
together with the AC power cord or speaker cables.
Connection to audio/video components
A
DIGITAL IN terminals
Used for the input of digital audio signals. Connect these
digital input terminals to the appropriate digital output
terminals of the digital audio source unit such as a DVD or
CD player.
Use a good quality RCA coaxial cable or optical digital cable.
< When inserting the plug of the optical cable, the protective
shutter of the terminal will open and you should hear it click
into position when fully inserted. Be careful that you do not
force the plug, because this could result in damage to the
protective shutter, the cable, or the unit itself.
B
AUDIO IN/OUT jacks
Analog 2-channel audio signal is input or output from these
jacks. Connect the component with commercially-available
RCA cables.
Make sure to connect :
white plug q white jack (L: left channel)
red plug q red jack (R: right channel)
C
6CH DIRECT IN jacks
If your DVD player or decoder has 6-channel analog audio
outputs, connect them with good quality RCA cables.
ENGLISH

Publicité

loading