Publicité
50
Surround Mode 2
C
When the source is PCM (2-channel stereo) and IN-AUTO or
IN-PCM is selected, or when analog stereo signals are input,
you can select one of the following surround modes:
DOLBY PRO LOGIC II MOVIE, DOLBY PRO LOGIC, DOLBY
PRO LOGIC II MUSIC, DOLBY PRO LOGIC II MATRIX, DOLBY
PRO LOGIC II CUSTOM, DOLBY VIRTUAL, THEATER, HALL,
STADIUM
< When the DSP MODE button is pressed once, the current
surround mode is displayed. Press the DSP MODE button
repeatedly to select any other surround mode.
< When you press the DSP MODE button, the sound is cut off for
a moment.
< DOLBY DIGITAL can be selected only during playback of a
DVD disc recorded in DOLBY DIGITAL format.
< The DSP indicator lights when THEATER, HALL, STADIUM or
DOLBY VIRTUAL is selected.
(DSP: Digital Signal Processor)
STEREO
Press the STEREO button to select the stereo mode. "STEREO"
is scrolled, and sound is output from front speakers (and the
sub-woofer if connected).
To cancel the stereo mode, select any other surround mode by
pressing the DSP MODE button.
< If you select the stereo mode while the digital signal of DOLBY
DIGITAL or DTS are being input, the multi-channel sound is
downmixed to 2-channel.
< If the SPEAKER button is set to off while the digital signal of
DOLBY DIGITAL or DTS are being input, the multi-channel
sound is downmixed to 2-channel automatically. And when the
SPEAKER button is set to on, it will return to the previous
surround mode.
ENGLISH
Publicité
