Publicité
1
1
2
38
2
Balancing relative volume between speakers
during playback of DVD
If the balance has already been set using the test tone function,
you don't have to change the setting of speakers (FL, C, FR, SR,
SL, SW).
Speaker Configuration 4
1
(During playback of DVD,) press the CH SEL (CHANNEL
SELECTOR) button.
Each time the CH SEL button is pressed, the channel is
changed as follows:
FL
C
FR
< A speaker set to "None" or "No" will not appear on the display.
< When STEREO or Dolby Virtual is selected, or when the
SPEAKER button is set to off, only the front speakers will
appear on the display.
2
Within 2 seconds, press the LEVEL buttons to change the
level.
< The level of speakers can be adjusted in 1 dB steps from -15
dB to +15 dB.
Repeat step
1
and
2
to change other settings.
When all the configurations have been finished, leave the unit
idle for 2 seconds to exit the Channel Select mode.
ENGLISH
SR
SL
SW
Publicité
