Télécharger Imprimer la page

Teac AG-5D Manuel Du Propriétaire page 23

Publicité

Front Panel Display
a
c d
b
m
a
displays current status.
b
illuminates when RDS function is active.
c
illuminates when the multi-channel sound is downmixed to
stereo, or when an FM stereo broadcast is tuned.
d
illuminates when a station is tuned.
e
illuminates when tone control is set to off.
f
Illuminates when the tape monitor function is on.
g
illuminates when preset tuning mode is selected.
blinks when the MEMORY button is pressed.
h
i
meter
j
illuminates when sleep timer is set.
k
illuminates or blinks when a digital source is selected.
l
illuminates when the decoding mode is set to "IN-AUTO".
m
surround mode
g
e
f
h
j
l
k
i
ENGLISH
Remote Control Unit
The provided Remote Control Unit allows the unit to be operated
from a distance.
When operating the remote control unit, point it towards the
remote sensor on the front panel of the unit.
< Even if the remote control unit is operated within the effective
range, remote control operation may be impossible if there are
any obstacles between the unit and the remote control.
< If the remote control unit is operated near other products
which generate infrared rays, or if other remote control
devices using infrared rays are used near the unit, it may
operate incorrectly. Conversely, the other products may
operate incorrectly.
Battery Installation
1
Remove the battery compartment cover.
2
Insert two "AAA" (R03, UM-4) dry batteries. Make sure that
the batteries are inserted with their positive "+" and negative
"_" poles positioned correctly.
3
Close the cover.
Battery Replacement
If the distance required between the remote control unit and
main unit decreases, the batteries are exhausted. In this case
replace the batteries with new ones.
Precautions concerning batteries
< Be sure to insert the batteries with correct positive "+" and
negative "_" polarities.
< Use batteries of the same type. Never use different types of
batteries together.
< Rechargeable and non-rechargeable batteries can be used.
Refer to the precautions on their labels.
< When the remote control unit is not to be used for a long time
(more than a month), remove the batteries from the remote
control unit to prevent them from leaking. If they leak, wipe
away the liquid inside the battery compartment and replace
the batteries with new ones.
< Do not heat or disassemble batteries and never dispose of old
batteries by throwing them in a fire.
23

Publicité

loading