Publicité
AM Outdoor Antenna
Antenne AM extérieure
Antena exterior AM
8
AM Loop Antenna
Antenne-cadre AM intérieure
Antena de cuadro de AM interior
Connection (AM antenna)
AM Indoor Loop Antenna
The high-performance AM loop antenna provided with this
unit is sufficient for good reception in most areas.
To stand the loop antenna on a surface, fix the claw to the
slot in the antenna base.
Connect the loop antenna's wires to the AM antenna
terminals.
How to connect:
Turn the terminal cap counterclockwise to loosen it, put the
wire under the cap, and turn the cap clockwise to securely
connect the wire.
Make sure it is fastened securely by pulling the cord lightly.
Place the antenna on a shelf or hang it on a window frame,
etc., in the direction which gives the best reception. Keep all
other wires such as power cords, speaker wires or
interconnect wires as far away as possible from the
antenna.
< If the AM loop antenna provided does not deliver sufficient
reception (often due to being too far from the transmitter or
in a concrete building, etc.), it may be necessary to use an
outdoor AM antenna.
Use either a high quality commercial AM antenna or, if not
available, an insulated wire more than 5 m long, strip one
end, and connect this to the terminal as shown.
The antenna wire should be strung outdoors or indoors near
a window. For better reception, connect the GND terminal to
a reliable ground.
Note:
Even when using an outdoor AM antenna, do not disconnect
the AM loop antenna.
ENGLISH
Publicité
