Publicité
F
G
H
I
44
Basic Operation 3
F
Tone Direct
Press the TONE DIRECT button to turn on or off the tone
control function.
When the tone control is set to off, the DIRECT indicator
lights on the display and you can listen to the sound without
tone effects.
G
Tone Control
< When 6CH DIRECT is selected, the TONE DIRECT button and
the TONE MODE button will not work.
1. If the DIRECT indicator is lit, press the TONE DIRECT button
to turn the tone control function on.
2. Press the TONE MODE button to select "BASS" or "TRBL".
To adjust the level of low frequency sound range, select
"BASS".
To adjust the level of high frequency sound range, select
"TRBL (treble)".
3. Within 3 seconds, press the LEVEL buttons to change the
setting.
The level can be adjusted in 2 dB steps from -10 to +10.
< Tone control does not work when the digital signals of DTS
or Dolby Digital are input, or when 6CH DIRECT is selected.
H
Dimmer
You can dim or turn off the front panel's display by pressing
the DIMMER button:
< When the display is turned off, pressing any button will turn
the display on.
< This function will be cancelled when the STANDBY/ON or
the POWER switch is pressed.
< When you set the sleep timer, the display is dimmed
automatically.
I
Sleep Timer
The power can be switched off after a specified amount of
time.
Press the SLEEP button repeatedly until desired time
appears on the display.
SLEEP 10 (20, 30, 60, 90):
The power will be switched off 10 (20, 30, 60 or 90) minutes
later.
Normal display: the sleep timer is off.
When you set the sleep timer, the display is dimmed, and the
remaining time is displayed.
ENGLISH
Publicité
