Publicité
1
2
46
Recording a Source
Recording a Source
1. Select a source to be recorded by turning the FUNCTION knob
(or pressing one of the FUNCTION buttons of the remote
control unit).
2. Start recording.
< The volume and tone control have no effect on the recording
signals.
< The analog signals input from the 6CH DIRECT INPUT jacks
cannot be recorded.
Dubbing from VIDEO 2 or 3 to VIDEO 1
1
Select VIDEO 2 or 3 by turning the FUNCTION knob (or
pressing the VIDEO 2 or 3 button of the remote control unit).
2
Start recording on the VCR connected to VIDEO 1 REC jacks.
3
Start playback on the VCR connected to VIDEO 2 or 3 INPUT
jacks.
The audio and video signals input from VIDEO 2 or 3 are output
from VIDEO 1 REC jacks.
< Copy protected DVD discs cannot be dubbed.
< The video signal from S-VIDEO or VIDEO jacks cannot be
mixed. Be sure to connect all the components via the same
kind of jacks.
Dubbing the audio and video signals separately
While dubbing the video signal of VIDEO 2 or 3, you can
replace the sound from VCR with the sound from an audio
source such as CD.
1
Select the video source to be recorded (VIDEO 2 or 3) using
the FUNCTION buttons of the remote control unit.
2
Select the audio source to be recorded (CD, TUNER or AUX)
using the FUNCTION buttons of the remote control unit.
Do not turn the FUNCTION knob of the main unit, or the video
source selection in step
1
3
Start recording on the VCR connected to VIDEO 1 REC jacks.
4
Start playback of the video and audio source to be recorded.
The picture from the video component appears on the TV, and
the sound from the audio component is output from the
speakers.
ENGLISH
might be cancelled.
Publicité
