Publicité
72
Troubleshooting 1
If you experience any problems with the unit, please take a
moment to look through this chart and see if you can solve the
problem yourself before you call your dealer or a TEAC service
center.
No power
e Check the connection to the AC power supply. Check and
make sure the AC source is not a switched outlet and that, if
it is, the switch is turned on. Make sure there is power to the
AC outlet by plugging another item such as a lamp or fan.
There is no sound or only a very low-level sound is heard.
e Adjust the volume by turning the MASTER VOLUME knob.
e If the SPEAKER indicator isn't lit, press the SPEAKER button
to turn it on.
e Check that the speakers and components are connected
securely.
e Check the operation of the connected component.
e Check the audio output setting of your DVD player.
e Select the proper source using the FUNCTION knob and the
DIGITAL INPUTS button.
e Select the proper surround mode (see page 48).
e If "MUTE" is blinking on the display, press the MUTING
button to restore the sound.
No sound from surround or center speakers.
e Check the speaker setting (see page 32).
e Check the channel level setting (see page 36~38).
e Select the proper surround mode (see page 48).
e Check the audio output setting of your DVD player. Play a
multi-channel source.
Sound cuts off during listening to the music or no sound even
though power is ON.
e Speaker impedance is less than prescribed for this unit.
e Turn the power off and reduce the volume.
Low bass response.
e Speaker polarity (+/-) is reversed. Check all speakers for
correct polarity.
Severe hum or noise is heard.
e Check that the speakers are connected securely.
e Make sure the line cords and speaker cables are as far
away from the AC supply as possible.
"DIGITAL" indicator blinks.
e The unit cannot perceive the digital signal (see page 40).
e Select the proper decoding mode by pressing the AUTO
button (see page 48).
No picture.
e Check that the system is connected properly.
e Turn on the TV.
e Make sure you have selected the proper video input on the
TV so that you can view the pictures.
e Select the proper video source using the FUNCTION knob.
ENGLISH
Publicité
