Publicité
3
1
2
4
1
2
3
4
5
32
5
Speaker Configuration 1
It is important to perform speaker configuration prior to using the
unit.
To enjoy multi-channel surround sound, such as 5.1, you need 5
speakers (Front Left, Center, Front Right, Surround Right,
Surround Left) and a powered sub-woofer.
< When no action is taken for 5 seconds, the Speaker Setup
mode will be cancelled.
1
Press the POWER switch.
The unit enters standby mode, and the STANDBY indicator
lights.
2
Press the STANDBY/ON switch to turn the unit on.
The STANDBY indicator goes off.
3
Press the SPEAKER SETUP button.
One of the speaker settings such as "FL-CL-SL" appears on the
display.
Each time the SPEAKER SETUP button is pressed, the mode is
changed as follows:
speaker size setting
sub-woofer setting
distance (front)
distance (center)
distance (surround)
Virtual Surround Angle
4
Press the SELECT buttons to change the setting.
For details of each setting, see page 34.
Repeat step
3
and
4
to set other configurations.
5
When all the configurations has been finished, press the
MEMORY button (or the P.SCAN button of the remote control
unit) to save the changes and exit the Speaker Setup mode.
Be sure to press the MEMORY button, or the changes will be
cancelled.
ENGLISH
Publicité
