Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS (XE-70M CONTROLLER)
Page 1 – Language and Units Selection
Figure 17 : Language and Units Selection
Language is selectable from the following 30 choices:
English (default)
•
Bulgarian
•
Chinese, simplified
•
Croatian
•
Czech
•
Danish
•
Dutch
•
Estonian
•
Finish
•
French
•
German
•
Greek
•
Hungarian
•
Italian
•
Indonesian
•
The controller will display all screens in the selected
language and only one language can be selected at a
time��
Each language appears in its native translation��
Temperature is selectable between
Pressure is selectable between psi, kpa, bar, kg/cm
Page 2 – Time & Date Settings
Figure18 : Time & Date Settings
All items are adjustable��
Time allows the current time to be set in a 24 hour format
Date allows the current month, day, and year to be set
18
RELEASED 20/Jul/2016 17:56:55 GMT
All manuals and user guides at all-guides.com
Korean
•
Latvian
•
Lithuanian
•
Maltese
•
Norwegian
•
Polish
•
Portuguese
•
Romanian
•
Russian
•
Slovak
•
Slovenian
•
Spanish
•
Swedish
•
Thai
•
Turkish
•
F and
C��
o
o
2
��
Date Format is selectable between dd/mm/yyyy
(default), mm/dd/yyyy, and YYYY/MM/DD
Confirm New Time and Date is used to verify that
changes to selections are desired�� An "x" must appear in
the checkbox before any changes will take affect��
The controller will continue to display any changes, even
when the selections have not been confirmed and the
user exits the page, then returns�� Cycling of the power
returns all selections to their current settings��
NOTICE
The controller does not support Daylight Savings
Time��
Page 3 – Backlight Settings
Figure 19 : Backlight Settings
Backlight Brightness adjusts the brightness of the display��
NOTICE
The backlight will be switched ON whenever any of
the controller's keys are pressed��
WARNING
The start, stop, load, unload, reset, and
acknowledge keys on the controller remain
functional while the backlight is switched OFF�� It is
recommended to press the enter key or one of the
navigation keys in order to switch the backlight ON��
Page 4 - Serial Port Address Settings
Figure 20 : Serial Port Address Settings
This page allows the user to set up the network addresses
for the RS-485 networks the controller is capable of
communicating with��
80448418 Rev.C
Publicité
