Télécharger Imprimer la page

AL-KO BC 410 II Mode D'emploi page 235

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
EC declaration of conformity
We hereby declare that this product, in the form in which it is marketed, meets the requirements of the harmonised EU
guidelines, EU safety standards, and the product-specific standards.
Product
Brush cutter
Serial number
G2302305
Model
BC 410 II
BC 4125 II
Sound power level
measured / guaranteed
EN ISO 3744
BC 410 II
116 / 119 dB(A)
BC 4125 II 116 / 119 dB(A)
Warranty
If any material or manufacturing defects are found during the statutory customer protection period, we will either repair
or replace the equipment, whichever we consider the more appropriate. This statutory period may vary according to the
legislation in force in the country where the equipment was purchased.
Our warranty is valid only if:
The equipment has been used properly
The operating instructions have been followed
Genuine replacement parts have been used
The following are not covered by warranty:
Paint damage due to normal wear
Wear parts identified by a border xxx xxx (x) on the spare parts list
Combustion motors – these are covered by a separate warranty from the manufacturer concerned
To make a claim under warranty, please take this statement of warranty and proof of purchase to the nearest autho-
rised customer service centre. This warranty does not affect the usual statutory rights of the customer relative to the
seller.
474 627_b
Manufacturer
AL-KO Geräte GmbH
Ichenhauser Str. 14
89359 KOETZ
DEUTSCHLAND
EU directives
2006/42/EG
2014/30/EU
2000/14/EG
Conformity evaluation
2000/14/EG
Appendix V
Notified body
TÜV Rheinland Product Safety GmbH
Am Grauen Stein
51105 Köln
Germany
The warranty is no longer valid if:
┌──────┐
└──────┘
Executive Officer
Andreas Hedrich
Ichenhauser Str. 14
89359 KOETZ
DEUTSCHLAND
Harmonised standards
EN ISO 11806:2011
EN ISO 14982:2009
EN ISO 22868:2011
EN ISO 22867:2011
Wolfgang Hergeth, Managing Director
The equipment has been tampered with
Technical modifications have been made
The trimmer was not used for its intended purpose
(for example, used for commercial or communal ap-
plications)
EN
Kötz, 2016-08-05
EN
235

Publicité

loading

Ce manuel est également adapté pour:

Bc 4125 ii