Changing The Program Mid-Cycle - FAR LVI1120 A++49M Manuel D'utilisation

5. Choose a program, the response light will
turn on. Then close the door, the dishwasher
will start its cycle.

CHANGING THE PROGRAM MID-CYCLE

A wash cycle can only be changed if it has
been running for a short time otherwise, the
detergent may have already been released and the
dishwasher may have already drained the wash
water. If this is the case, the dishwasher needs
to be reset and the detergent dispenser must
be refilled. To reset the dishwasher, follow the
instructions below:
1. Open the door a little to stop the dishwasher,
after the spray arm stop working, you can
open the door completely.
2. Press any Program button for more 3 seconds
to cancel the current program and the
machine goes into standby state.
3. You can change the program to the desired
cycle setting.
ENGLISH
GB-61