Starting A Washing Program - FAR LVFI4515PI Manuel D'utilisation

ENGLISH

STARTING A WASHING PROGRAM

Wash Cycle Table
NOTE: ( ) Means: need to fill rinse into the Rinse-Aid Dispenser.
Water consumption doesn't include regeneration water.
Program Cycle Selection Description of
Information Cycle
For heaviest Prewash (50°C)
soiled
P1 Wash (65°C )
crockery,
Intensive Rinse
and normally
Rinse
soiled pots>
pans> dishes Rinse (55°C)
etc with dried
Drying
on soiling.
For normally Prewash (45°C)
soiled loads,
P2 Wash (55°C)
such as pots,
Normal Rinse
plates, glasses
Rinse (65°C)
and lightly
soiled pans. Drying
This is Prewash
standard
P3 Wash (50°C)
programme, it
ECO Rinse
is suitable to
(* EN Rinse (60°C)
clean normally
50242)
soiled
Drying
tableware
and it is the
most efficient
programme
in terms of
its combined
energy
and water
consumption
for that type
of tableware.
GB-28
Detergent Running Energy Water Rinse
pre/main time (min) (Kwh) (L) Aid
5/25g 140 1.45 19
(or 3in1)
5/25g 160 1.35 15
(or 3in1)
5/25g 170 1.02 12
(or 3in1)
Program Cycle Selection Description of Detergent
Information Cycle pre/main
For lightly Pre-wash
soiled loads,
P4 Wash (40°C)
such as
Glass Rinse
glasses, crystal
Rinse (60°C)
and fine china.
Drying
For lightly Pre-wash (50°C)
soiled loads
P5 Wash (60°C)
that do not
1 Hour Rinse (55°C)
need excellent
Drying
drying
efficiency.
A shorter wash Wash (40°C)
for lightly
P6 Rinse
soiled loads
Rapid Rinse (45°C)
that do not
need drying.
NOTE:
*EN 50242 : This programme is the test cycle. The information for comparability test
in accordance with EN 50242, as follows:
• Capacity: 12 setting
• Position Upper basket: upper wheels on rails
• Rinse aid setting: 6
• Pl: 0.49w; Po: 0.45w.
Turning On the Appliance
Starting a cycle wash
Draw out the lower and upper basket, load the dishes and push them back.
1.
It is commended to load the lower basket first, then the upper one
(see the section entitled "Loading the Dishwasher" ).
Pour in the detergent (see the section entitled "Salt, Detergent and Rinse Aid").
2.
Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ,
3.
the specification of the socket is 10A 250VAC. Make sure that the water supply is
turned on to full pressure.
ENGLISH
Running Energy Water Rinse
time (min) (Kwh) (L) Aid
5/25g 120 0.85 15
5/25g 60 1.0 10
20g 40 0.6 11.5
GB-29