Operation Instruction; Control Panel - FAR LVFI4515PI Manuel D'utilisation

ENGLISH
Running the Turn on the water tap ,close the door. The machine will start
dishwasher working after about 10 seconds.
A running cycle can only be modified if it has been running
1.
for a short time. Otherwise the detergent may have already
been released and the water already drained. If this is the
case, the detergent dispenser must be refilled.
• Changing the
Press the Programme Button for more than 3 seconds to
programme 2.
cancel the running programme.
Select a new programme.
3.
Restart the dishwasher
4.
Open the door a little to
1.
stop the dishwasher.
• Add forgotten After the spray arms stop working,
2.
dishes in the you can open the door completely.
dishwasher.
Add the forgotten dishes.
3.
Close the door, the dishwasher will
4.
start running again after 10 seconds.
• If the appliance • If the appliance is switched off during a wash cycle, when
is switched off switched on again, please re-select the washing cycle
during a wash and operate the dishwasher according to the original
cycle. Power-on state ).
When the working cycle has finished, the buzzer of the
Switch off the
dishwasher will sound 8 times, then stop.
appliance
Turn off the appliance using the On/Off Button.
Warning: wait a few minutes (about 15 minutes) before
unloading the dishwasher to avoid handling the dishes and
Turn off the water
utensils while they are still hot and more susceptible to break.
tap, unload the
baskets
They will also dry better. Unload the appliance, starting from
the lower basket.
GB-16
WARNING!
Open the door
carefully. Hot steam
may escape when the
door is opened!

OPERATION INSTRUCTION

IMPORTANT
To get the best performance from your dishwasher, read all operating instructions
before using it for the first time.

Control Panel

On/Off Button: To turn on/off the power supply.
1.
Half load functions Button: To select Half load functions. (With this Half load
2.
function you can only use it when you have only about or less than 6 place setting
dishes, and you will see less water and energy consumption , can only be used with
Intensive, Normal, ECO, Glass and 60 min .)
Program Button: To Press the button to select a wash Program.
3.
Delay Button: To Press the button to delay.
4.
Display screen: to show the error code, delay time etc.
5.
• Rinse Aid indicator:
Indicates when the dispenser needs to be refilled.
• Add salt indicator:
Indicates when the dispenser needs to be refilled.
• Delay time, Program indicators or error codes indicator:
• Half load functions indicator: 1/2
• Water inlet warning light:
Being on when faucets is not opened.
ENGLISH
GB-17