Installation Instruction; Electrical Requirements - FAR LVIF1119A++49M Manuel D'utilisation

ENGLISH
Seals
One of the factors that cause odours to form in
the dishwasher is food that remains trapped in
the seals. Periodic cleaning with a damp sponge
will prevent this from occurring.

INSTALLATION INSTRUCTION

WARNING
Electrical Shock Hazard
Disconnect electrical power before
installing dishwasher.
Failure to do so could result in death
or electrical shock.
Attention
The installation of the pipes and electrical
equipment should be done by professionals.
About Power Connection
WARNING
For personal safety:
• Do not use an extension cord or an adapter
plug with this appliance.
• Do not, under any circumstances, cut or
remove the earthing connection from the
power cord.
GB-22

Electrical requirements

Please look at the rating label to know the
rating voltage and connect the dishwasher to the
appropriate power supply. Use the required fuse
10A/13A/16A, time delay fuse or circuit breaker
recommended and provide separate circuit
serving only this appliance.
Electrical connection
Ensure the voltage and frequency of the power
being corresponds to those on the rating plate.
Only insert the plug into an electrical socket
which is earthed properly. If the electrical socket
to which the appliance must be connected is
not appropriate for the plug, replace the socket,
rather than using an adaptors or the like as they
could cause overheating and burns.
Ensure that proper earthing exists before
use
ENGLISH
GB-23