Filling The Rinse Aid Reservoir; Adjusting The Rinse Aid Reservoir - FAR LVIF1119A++49M Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
As the rinse aid diminishes, the size of the black
dot on the rinse aid level indicator changes, as
illustrated below.
Full
3/4 full
1/2 full
Function of detergent
The chemical ingredients that compose the
detergent are necessary to remove, crush and
dispense all dirt out of the dishwasher. Most of
the commercial quality detergents are suitable for
this purpose.
WARNING
• Proper Use of Detergent
Use only detergent specifically made for
dishwashers use. Keep your detergent fresh
and dry.
Don't put powdered detergent into the
dispenser until you are ready to wash dishes.
Dishwasher detergent is corrosive!
Keep dishwasher detergent out of the
reach of children.
GB-58
1/4 full
Empty

Filling The Rinse Aid Reservoir

1. Remove the rinse aid
2. Carefully pour in
reservoir cap by rotating
the rinse-aid into
it counter clockwise.
its dispenser, whilst
avoiding it to overflow.
NOTE:
Clean up any spilled
3. Close the rinse
rinse aid with an
aid reservoir cap by
absorbent cloth to avoid
rotating it clockwise.
excessive foaming during
the next wash.

Adjusting the rinse aid reservoir

Turn the rinse aid indicator dial to a
number between 1 and 6. The higher
the number, the more rinse aid the
dishwasher uses. If the dishes are not
drying properly or are spotted, adjust
adjust lever
the dial to the next higher number
(Rinse)
until your dishes are spot-free.
Reduce it if there are sticky whitish
stains on your dishes or a bluish film
on glassware or knife blades.
ENGLISH
GB-59

Hide quick links:

Publicité

Chapitres

Table des Matières
loading

Table des Matières