Caring For The Dishwasher; Moving The Appliance - FAR LVIF1119A++49M Manuel D'utilisation

ENGLISH

CARING FOR THE DISHWASHER

Frost precaution
Please take frost protection measures on the
dishwasher in winter. Every time after washing
cycles, please operate as follows:
1. Cut off the electrical power to the dishwasher
at the supply source.
2. Turn off the water supply and disconnect the
water inlet pipe from the water valve.
3. Drain the water from the inlet pipe and
water valve. (Use a pan to gather the water)
4. Reconnect the water inlet pipe to the water
valve.
5. Remove the filter at the bottom of the tub
and use a sponge to soak up water in the
sump.
After every wash
After every wash, turn off the water supply to
the appliance and leave the door slightly open so
that moisture and odors are not trapped inside.
Remove the plug
Before cleaning or performing maintenance,
always remove the plug from the socket.
GB-20
No solvents or abrasive cleaning
To clean the exterior and rubber parts of the
dishwasher, do not use solvents or abrasive
cleaning products. Only use a cloth with warm
soapy water.
To remove spots or stains from the surface of
the interior, use a cloth dampened with water
and a little vinegar, or a cleaning product made
specifically for dishwashers.
When not in use for a long time
It is recommend that you run a wash cycle with
the dishwasher empty and then remove the
plug from the socket, turn off the water supply
and leave the door of the appliance slightly
open. This will help the door seals to last longer
and prevent odors from forming within the
appliance.

Moving the appliance

If the appliance must be moved, try to keep it in
the vertical position. If absolutely necessary, it
can be positioned on its back.
ENGLISH
GB-21