Connection Of Drain Hoses; Position The Appliance - FAR LVIF1119A++49M Manuel D'utilisation

ENGLISH

Connection Of Drain Hoses

Insert the drain hose into a drain pipe with a
minimum diameter of 4 cm, or let it run into the
sink, making sure to avoid bending or crimping
it. The height of drain pipe must be less than
1000mm. The free end of the hose must not be
immersed in water to avoid the back flow of it.
Please securely fix the drain hose in either
position A or position B
Back of dishwasher
Drain hose
Water Inlet
Drain Pipe
Mains Cable
How to drain excess water from hoses
If the sink is 1000 higher from the floor, the
excess water in hoses cannot be drained directly
into the sink. It will be necessary to drain
excess water from hoses into a bowl or suitable
container that is held outside and lower than the
sink.
GB-26
Water outlet
Connect the water drain hose. The drain hose
must be correctly fitted to avoid water leaks.
Ensure that the water drain hose is not kinked or
squashed.
Extension hose
If you need a drain hose extension, make sure to
use a similar drain hose.
It must be no longer than 4 meters; otherwise
the cleaning effect of the dishwasher could be
reduced.
Counter
Syphon connection
The waste connection must be at a height less
than 100 cm (maximum) from the bottom of the
dish. The water drain hose should be fixed.

Position The Appliance

Position the appliance in the desired location.
The back should rest against the wall behind
it, and the sides, along the adjacent cabinets or
walls. The dishwasher is equipped with water
supply and drain hoses that can be positioned
either to the right or the left sides to facilitate
proper installation.
Levelling the appliance
Once the appliance is positioned for levelling,
the height of the dishwasher may be altered via
ENGLISH
GB-27