Water Supply And Drain - FAR LVI1120 A++49M Manuel D'utilisation

Water Supply And Drain

Cold water connection
Connect the cold-water
supply hose to a threaded
3/4(inch) connector
and make sure that it is
fastened tightly in place.
If the water pipes are new
or have not been used for
an extended period of time,
let the water run to make sure that the water is
clear. This precaution is needed to avoid the risk
of the water inlet to be blocked and damage the
appliance.
About the safety supply hose
The safety supply hose consists of the double
walls. The hose's system guarantees its
intervention by blocking the flow of water in
case of the supply hose breaking and when the
air space between the supply hose itself and the
outer corrugated hose is full of water.
ordinary supply hose
ENGLISH
safety
supply hose
GB-21