FAR LVI1120 A++49M Manuel D'utilisation page 108

Full-integrated model
Install the hook on the aesthetic wooden panel
and put the hook into the slot of the outer door
of dishwasher (see figure A). After positioning
of the panel, fix the panel onto the outer door by
screws and bolts (See figure B).
Step 3. Tension adjustment of the door spring
1. The door springs are
set at the factory to the
proper tension for the
outer door. If aesthetic
wooden panel are
installed, you will have
to adjust the door spring
tension.
A
1. Take away the four short screws
2. Pin up the four long screws
ENGLISH
B
GB-29