FAR LVI1120 A++49M Manuel D'utilisation page 114

Problem
Rattling noise in the
dishwasher
Knocking noise in
the water pipes
The dishes are not
clean
The dishes are not
clean.
Cloudiness on
glassware.
White spots appear
on dishes and
glasses.
Black or grey marks
on dishes
Detergent left in
dispenser
Possible Causes
Items of crockery are
loose in the dishwasher.
This may be caused by
on-site installation or
the cross-section of the
piping.
The dishes were not
loaded correctly.
The program was not
powerful enough.
Not enough detergent
was dispensed.
Items are blocking the
movement of the spray
arms.
The filter combination
is not clean or is not
correctly fitted in the
base of wash cabinet.
This may cause the
spray arm jets to get
blocked.
Combination of soft
water and too much
detergent.
Hard water area
can cause limescale
deposits.
Aluminum utensils
have rubbed against
dishes
Dishes block detergent
dispenser
What To Do
Interrupt the program and
rearrange the items of crockery.
This has no influence on the
dishwasher function. If in doubt,
contact a qualified plumber.
See PART II «Preparing And
Loading Dishes».
Select a more intensive program.
Use more detergent, or change
your detergent.
Rearrange the items so that the
spray can rotate freely.
Clean and/or fit the filter
correctly.
Clean the spray arm jets.
Use less detergent if you have soft
water and select a shorter cycle
to wash the glassware and to get
them clean.
Add more detergent.
Use a mild abrasive cleaner to
eliminate those marks.
Re-loading the dishes properly.
ENGLISH
GB-35