Starting A Cycle Wash - FAR LVI1120 A++49M Manuel D'utilisation

ENGLISH
Program
90 min
Rapid
NOTE:
This program is the test cycle. The
(*EN50242)
information for comparability test in
accordancewith EN50242.

STARTING A CYCLE WASH

1. Draw out the lower and upper basket, load
the dishes and push themback.
It is commended to load the lower basket
first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power
supply refer to last page'Troduct fiche». Make
sure that the water supply is turned on to full
pressure.
4. Open the door, press the Power button.
GB-60
Description Detergent
Of Cycle Pre/Main
Wash(60°C)
Rinse 2Q g
Rinse(65°C) (1 piece
Drying
Wash(50°C) 2Q g
Rinse (1 or 2
Rinse(45°C) pieces)
Running Energy
Time(min) (Kwh)
90 1.350
30 0.751
Water Rinse
(L) Aid
11.5
11.2