FAR LVI1120 A++49M Manuel D'utilisation page 91

ENGLISH
2. Place the end of the funnel (supplied)
into the hole and pour in about 1.5kg of
dishwasher salt.
3. Fill the salt container to its maximum limit
with water, It is normal for a small amount of
water to come out of the salt container.
4. After filling the container, screw back the cap
tightly.
5. The salt warning light will stop being after
the salt container has been filled with salt.
6. Immediately after filling the salt into the
salt container, a washing program should be
started (We suggest using a short program).
Otherwise the filter system, pump or
other important parts of the machine may
be damaged by salty water. This is out of
warranty.
NOTE:
• The salt container must only be refilled when
the salt warning light ( ) in the control panel
comes on. Depending on how well the salt
dissolves, the salt warning light may still be on
even though the salt container is filled.
GB-12