Troubleshooting Tips - FAR LVI1120 A++49M Manuel D'utilisation

TROUBLESHOOTING TIPS

Before Calling For Service
Reviewing the charts on the following pages
may save you from calling for service.
Problem
Dishwasher doesn't
start
Water not pumped
form dishwasher
Possible Causes
Fuse blown, or the
circuit break tripped.
Power supply is not
turned on.
Water pressure is low
Door of dishwasher not
properly closed.
Twisted or trapped
drain hose.
Filter clogged.
Kitchen sink clogged.
What To Do
Replace fuse or reset circuit
breaker. Remove any other
appliances sharing the same
circuit with the dishwasher.
Make sure the dishwasher is
turned on and the door is closed
securely.
Make sure the power cord is
properly plugged into the wall
socket.
Check that the water supply is
connected properly and the water
is turned on.
Make sure to close the door
properly and latch it.
Check the drain hose.
Check coarse the filter.
Check the kitchen sink to make
sure it is draining well. If the
problem is the kitchen sink that
is not draining , you may need a
plumber rather than a serviceman
for dishwashers.
ENGLISH
GB-33