Adjusting Salt Consumption - FAR LVI1120 A++49M Manuel D'utilisation

ENGLISH
The softener should be adjusted according to the
hardness of the water in your area. Your local
Water Authority can advise you on the hardness
of the water in your area.

Adjusting salt consumption

The dishwasher is designed to allow for
adjustment in the amount of salt consumed
based on the hardness of the water used. This is
intended to optimise and customise the level of
salt consumption.
Please follow the steps below for adjustment in
salt consumption.
1. Open the door and switch on the appliance.
2. Press the Program button for more than
5 seconds, when the salt indicator flashes
means entering the water softener settings.
set model within 60 seconds after the
appliance was switched on.
3. Press the Program button to select the proper
set according to your local environment, the
sets will change in the following sequence:
H1->H2->H3->H4->H5->H6.
GB-46