Prior Using For The First Time; Adjusting Salt Consumption - FAR LV12C47MI17W Manuel D'utilisation

ENGLISH
starting up or not;
Note: Half-load function and extra drying
function only choose one at the same time
Dishwasher Features
Front view
1. Cup Shelf
2. Inner pipe
3. Lower Basket
4. Salt Container
5. Upper Basket
6.
GB-12
Back View
7. Spray arms
8. Filter assembly
9. Inlet pipe
connector
10. Drain pipe

4. PRIOR USING FOR THE FIRST TIME

Before using your dishwasher for the first time:
A. Set the water softener
B. Add 1.5Kg dishwasher salt and then full fill
the salt container with water
C. Fill the rinse aid dispenser
D. Fill in detergent
A. Water Softener
• The water softener must be set manually, using
the water hardness dial.
• The water softener is designed to remove
minerals and salts from the water, which
would have a detrimental or adverse effect on
the operation of the appliance.
• The higher the content of these minerals and
salts, the harder your water is.
• The softener should be adjusted according to
the hardness of the water in your area. Your
local Water Authority can advise you on the
hardness of the water in your area.

Adjusting Salt Consumption

The dishwasher is designed to allow for
adjustment in the amount of salt consumed
based on the hardness of the water used. This is
ENGLISH
GB-13