Front View; Back View; Prior To First Time Use; Adjusting Salt Consumption - FAR LVI1116 A++M Manuel D'utilisation

ENGLISH
7. Salt and rinse aid warning lights: To show
when the salt container or dispenser need to
be refilled
Finish light: Lights up when the washing
program finished
8. Start /Pause Button: To start or pause the
washing program.
Dishwasher Features

FRONT VIEW

1. Upper Basket
2. Inner pipe
3. Lower Basket
4. Salt Container
5. Dispenser
6. Cup Shelf
GB-16

BACK VIEW

7. Spray arms
8. Filter assembly
9. Inlet pipe
connector
10. Drain pipe
11. Adjuster

4. PRIOR TO FIRST TIME USE

Before using your dishwasher for the first time:
A. Set the water softener
B. Add 1.5Kg dishwasher salt and then full fill
the salt container with water
C. Fill the rinse aid dispenser
D. Fill in detergent
A. Water Softener
• The water softener must be set manually, using
the water hardness dial.
• The water softener is designed to remove
minerals and salts from the water, which
would have a detrimental or adverse effect on
the operation of the appliance.
• The more minerals there are, the harder your
water is
• The softener should be adjusted according to
the hardness of the water in your area. Your
local Water Authority can advise you on the
hardness of the water in your area.

Adjusting Salt Consumption

The dishwasher is designed to allow for
adjustment in the amount of salt consumed
ENGLISH
GB-17