FAR LVI1116 A++M Manuel D'utilisation page 69

ENGLISH
1
Step 1: Turn the filter
open
Step 2: lift the filter assy up
2
NOTE:
When following this procedure from step 1 to
step 2, the filter system will be removed; when
following it from Step 2 to Step 1, the filter
system will be installed.
GB-48
counterclockwise,
Remarks:
– After each cycle, check for any debris in the
filter to avoid future blockage.
– By unscrewing the coarse filter, you can
remove the filter system. Remove any food
remnants and clean the filters under running
water.
NOTE:
The entire filter assembly should be cle aned once
a week.
Cleaning the Filter
To clean the coarse filter and the fine filter, use
a cleaning brush. Reassemble the filter parts
as shown in the figures on page 45-47 and
reinsert the entire assembly in the dishwasher,
positioning it in its seat and pressing downwards.
WARNING!
When cleaning the filters, do not knock them.
Otherwise, the filters could be contorted and
the performance of the dishwasher could be
decreased.
ENGLISH
GB-49