FAR LVI1116 A++M Manuel D'utilisation page 51

ENGLISH
1. A running cycle can only
be modified if it has been
running for a short time.
Otherwise the detergent
may have already been
released and the water
already drained. If this
is the case, the detergent
• Changing
dispenser must be refilled.
the
programme
2. Press the Start/Pause
button to stop the machine .
Press the Program b utton
more than 3 seconds , the
machine will be in standby
state, then you can change
the program to the desired
cycle setting.
GB-12
1. Press the Start/Pause Button
to stop the washing.
WARNING!
Open the door care
fully. Look out for
hot steam when
opening the door!
• Adding fo
rgotten d
2.Open the door a little .
ishes in the
3. After the spray arms stop
dishwasher.
working, you can open the
door completely.
4.Add forgotten dishes.
5.Close the door
6. Press the Start/Pause
Button, the dishwasher will
run after 10 seconds.
• If the appliance is switched
• If the off during a wash cycle,
appliance when switched on again,
is switched please re-select the washing
off during a cycle and operate the
wash cycle. dishwasher according to the
original Power-on state.
ENGLISH
GB-13