FAR LVI1116 A++M Manuel D'utilisation page 57

ENGLISH
When to Refill the Rinse Aid Dispenser
Unless the rinse-aid warning light on the control
panel is on, you can always estimate the amount
from the color of the optical level indicator " C "
located next to the cap. When the rinse- aid
container is full, the indicator will be fully
dark. The size of the dark dot decreases as the
rinse- aid diminishes. You should never let the
rinse aid level be less than 1/4 full.
As the rinse aid diminishes, the size of the black
dot on the rinse aid level indicator changes, as
illustrated below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to
eliminate spotting
Empty
GB-24
C (Rinse-Aid indicator)
1 2
1. To open the dispenser, turn the cap to the
"open" (left) arrow and lift it out.
2. Carefully pour in the rinse-aid into its
dispenser, whilst avoiding it to overflow.
3. Replace the cap by inserting it aligned with
"open" arrow and turning it to the closed
(right) arrow.
NOTE:
Clean up any rinse aid spilled while during
filling with an absorbent cloth to avoid excessive
foaming next wash. Don't forget to replace the
cap before you close the dishwasher door.
ENGLISH
3
GB-25