Troubleshooting Tips - FAR LVSL9C47MI17W Manuel D'utilisation

ENGLISH
Start of Dishwasher
The following things should be checked before
starting the dishwasher.
1. The dishwasher is level and fixed properly
2. The inlet valve is open
3. Fill hose connections are fully tightened and
not leaking
4. The wires are tightly connected
5. The power is switched on
6. The inlet and drain hoses are knotted
7. All packing materials and printings should
be taken out from the dishwasher
Attention:
After installation, please make sure to keep
this manual. The content of this manual is very
helpful to the users.
GB-52

9. TROUBLESHOOTING TIPS

Before Calling for Service
Review the charts on the following pages may
save you from calling for service.
Problem Possible Causes
Dishwasher Fuse blown, or the
doesn't start circuit breaker acted
Power supply is not
turned on
Technical
problems
Water pressure is
low
Door of dishwasher
not properly closed
ENGLISH
What to Do
Replace fuse or
reset circuit breaker.
Remove any other
appliances sharing
the same circuit with
the dishwasher
Make sure the dis-
hwasher is turned on
and the door is closed
securely.
Make sure the power
cord is properly
plugged into the wall
socket.
Check that the water
supply is connected
properly and the
water is turned on.
Make sure to close
the door properly and
latch it.
GB-53