Operation Instruction; Changing The Program - FAR LVSL9C47MI17W Manuel D'utilisation

ENGLISH
(On models with water softener
system only.)
Electric indicator on control panel
(if provided).
If there is no salt warning light
Check the
in the control panel (for some
regeneration
models), you can
salt level
estimate when to
fill the salt into
the softener by the
number of cycles
the dishwasher has run.
Scrape off any large amount of
leftover food. Soften remnants of
Load the
burnt food in pans, then load the
baskets
baskets. Refer to the dishwasher
loading instructions.
Close the door, press the program
Select a button until the selected program
program lights up. (See the section entitled

Operation instruction )

GB-6
Turn on the water tap and press
Running
the Start/Pause button. The
the
machine will start working after
dishwasher
about 10 seconds.
1. A running cycle can only
be modified if it has been
running for a short time.
Otherwise the detergent may
have already been released and
the water already drained. If
this is the case, the detergent
Changing
dispenser must be refilled.
the program
2. Press the Start/Pause button,
then press the program button
more than 3 seconds to cancel
the running program.
3. Select a new program.
4. Restart the dishwasher.
ENGLISH
GB-7