Installation Instruction; Levelling The Appliance - FAR LVSL9C47MI17W Manuel D'utilisation

ENGLISH
always remove the plug from the socket.
• No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the
dishwasher, do not use solvents or abrasive
cleaning products.
Only use a cloth with warm soapy water.
To remove spots or stains from the surface of
the interior, use a cloth dampened with water
and a little vinegar, or a cleaning product made
specifically for dishwashers.
• When not in Use for a Long Time
It is recommend that you run a wash cycle with
the dishwasher empty and then remove the plug
from the socket, turn off the water supply and
leave the door of the appliance slightly open. This
will help the door seals to last longer and prevent
odours from forming within the appliance.
• Moving the Appliance
If the appliance must be moved, try to keep it in
the vertical position. If absolutely necessary, it can
be positioned on its back.
• Seals
One of the factors that cause odours to form in
the dishwasher is food that remains trapped in the
seals. Periodic cleaning with a damp sponge will
prevent this from occurring.
GB-46

8. INSTALLATION INSTRUCTION

Positioning the Appliance
Position the appliance in the desired location.
The back should rest against the wall behind
it, and the sides, along the adjacent cabinets or
walls. The dishwasher is equipped with water
supply and drain hoses that can be positioned
either to the right or the left sides to facilitate
proper installation.

Levelling the Appliance

Once the appliance is
positioned for levelling, the
height of the dishwasher may
be altered via adjustment of
the screwing level of the feet.
About Power Connection
WARNING!
For personal safety:
• Do not use an extension cord or an adapter
plug with this appliance.
• Do not, under any circumstances, cut or
remove the earthing connection from the
power cord.
ENGLISH
GB-47