Connecting The Water And Electricity Supplies - FAR LV13C37G21IX Manuel D'utilisation

All manuals and user guides at all-guides.com
2. Check the dishwasher by placing it so that
its sides or back panel are in contact with the
adjacent cabinets or even with the wall. This
appliance can also be recessed under a single
worktop .
3. Position the dishwasher on a level and sturdy
floor. If the floor is uneven, the front feet of
the appliance may be adjusted until it reaches
a horizontal position (the angle of inclination
must not exceed 2 degrees). If the appliance
is levelled correctly, it will be more stable and
much less likely to move or cause vibrations
and noise while it is operation.

Connecting the water and electricity supplies

Connection to the water and electricity
supplies should only be performed by a
qualified technician.
The dishwasher should not stand on top of
the water hoses or the electricity supply cable.
The appliance must be connected to the
water supply network using new piping. Do
not use old piping.
ENGLISH
GB-54