FAR LV13C37G21IX Manuel D'utilisation page 132

ENGLISH
H Connecting the water inlet hose
If the water pipes are new or have not been used
for an extended period of time, let the water run
to make sure that the water is clear and free of
impurities. If this precaution is not taken, there
is a risk that the water inlet can get blocked and
the appliance could be damaged.
Connecting the water outlet hose
the same material as the original. Remember
that the length of the hose should not exceed
4 meters even when with an extension.
GB-55
All manuals and user guides at all-guides.com
min 40mm
Connect the cold water
supply hose to a threaded
3/4(inch) connector
and make sure that it is
fastened tightly in place.
Fit the drainage hose
of your machine to the
drainage pipe without
bending.
If the length of the hose
is not sufficient, apply to
the authorized service for
an extension made from