Before Calling For Service - FAR LV13C37G21IX Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH

Before Calling for Service

Problem
Dishwasher
doesn't run
Drain pump
doesn't stop
Noise
GB-63
All manuals and user guides at all-guides.com
Reviewing the charts on the following
pages may make you be free of calling for
service.
Possible Causes
Fuse blown, or the circuit
breaker acted
Power supply is not
turned on
Water pressure is low
Overflow
Some audible sounds are
normal
Utensils are not secure in
the baskets or something
small has dropped into
the basket
Motor hums
What To Do
Replace fuse or reset circuit
breaker. Remove any other
appliances sharing the same circuit
with the dishwasher.
Make sure the dishwasher is
turned on and the door is closed
securely. Make sure the power cord
is properly plugged into the wall
socket.
Check that the water supply is
connected properly and the water is
turned on.
The system is designed to detect an
overflow. When it does, it shuts off
the circulation pump and turns on
the drain pump.
Sound from detergent cup opening.
To ensure everything is secured in
the dishwasher.
Dishwasher has not been used
regularly. If you do not use it often,
remember to set it to fill and pump
out every week, which will help
keep the seal moist.

Publicité

Table des Matières
loading

Table des Matières