FAR LV13C37G21IX Manuel D'utilisation page 118

ENGLISH
Turning on the Appliance
Starting a wash cycle...
Draw out the lower and upper basket, load the
dishes and
1. Push them back. It is recommended to
load the lower basket first, then the upper
one (see the section entitled «Loading the
Dishwasher»). Pour in the detergent (see the
section entitled «Salt, Detergent and Rinse
Aid»).
2. Insert the plug into the socket. The power
supply is 220-240V AC 50 Hz, the
specification of the socket is 12A250VAC.50
Hz.
Make sure that the water supply is turned on to
full pressure. Close the door, press the «Power»
button, Press the Programme button to select a
desired «Wash cycle». (See the section entitled
«Wash Cycle Table»). With a little force to
ensure the door is properly closed.
NOTE: A click could be heard when the door is
closed perfectly.
When the washing is over, you can shut off the
switch by pressing «Power» button.
GB-41
All manuals and user guides at all-guides.com