FAR LV13C37G21IX Manuel D'utilisation page 119

All manuals and user guides at all-guides.com
ENGLISH
Switching on
1. Open the tap, if it is closed.
2. Close the door.
3. Make sure the spray arms are not obstructed.
4. Switch the dishwasher on using the « Start/
Pause « button.
Select a program
Choose your program according to the type of
load and how dirty it is.
The different programs and their uses are
described in the program chart later on in this
booklet. Use the program button to select the
expected program .
Change the Program
Premise: A cycle that is underway can only be
modified if it has only been running for a short
time. Otherwise, the detergent may have already
been released, and the appliance may have
already drained the wash water. If this is the
case, the detergent dispenser must be refilled (see
the section entitled « Fill in the Detergent»).
GB-42