FAR LV13C37G21IX Manuel D'utilisation page 91

All manuals and user guides at all-guides.com
2. Set value can be found in the water hardness
table.
3. Close the door.
4. Switch on « Power».
5. Hold down «Delay» button and then press
«Program» button for 5 seconds. Digital
tube display H. Flashes on the digital display
(Factory setting is H4)
(Please refer to table for water hardness and
indicator light status: factory setting is H4.)
To change the setting:
1. Press «Delay» button.
Each time the button is pressed, the set value
increases by one level; when the value of H7 has
been reached, then jumps back to HO(off).
2. Press «Program» button. The chosen setting
has now been stored.
Intensif
90 minutes 30 minutes
Prérinçage
Marche/Arrêt Programme Demi-charge
Demi-charge
Départ Différé
Séchage +
Liquide de
rinçage
Sel
Séchage +
Démarrer/
Pause
ENGLISH
GB-14