CAPITAL SPORTS Helix Stride Mode D'emploi page 80

EN
80
Display indicators
• SPEED: Displays your current pedaling
speed as km/mile per hour.
• RPM: Displays your current pedaling speed
as revolutions per minute.
• If no target time is set, TIME counts up from
0:00 to a maximum of 99:59 minutes.
• If a destination time is set (1:00 to
99:00 minutes in 1-minute increments),
the console counts down from the set
destination time to 0:00.
• If no target distance is set, the total distance
travelled from 0.00 to 99.9 km/mile is
displayed.
• If a target distance has been set (1.0 to
99.0 km/ mile in 1 km/mile increments), the
console will count down from the set target
distance to 0.
• If no target calories have been set, the total
calories from 0 to 999 calories are displayed.
• If target calories have been set (10 to 990
kcal in 10 kcal increments), the console will
count down from the set target calories to 0.
• WATT: Shows the current power you are
producing at a specific resistance value or
the current value in watts during training.
Display range: 0 to 999.
• LEVEL: Displays the torque/resistance of the
current program, from level 1 to 32, in 1-step
increments.