CAPITAL SPORTS Helix Stride Mode D'emploi page 65

Step 8: Mounting the pedal arms
Repeat the steps on the other side.
Remove the pre-assembled nuts
(86), bolts (102) and screws (94)
from the pedal arm (63).
Note: The pedal has left (R) and
right side (L) different, please take
attention on R & L sticker. Please
put this sentence into.
Attach the pedal
arm to the front
and rear swing arm
using 2 bolts (102)
and nuts (86).
Then fasten the 4
covers to the pedal
arm with screws
(94).
EN
65