CAPITAL SPORTS Helix Stride Mode D'emploi page 69

(c) Connect the console wire (65) to the top terminal wire (66). Be
careful not to pinch the cables.
(d) Connect the console sensor cable (69) to the upper pulse
generator cable (55). Be careful not to pinch the cables.
(e) First push the upper connection cable (66) into the console
(53).
(f) Then slide the remaining cables into the handlebars (54).
(g) To correctly mount the console (53) at the hole position (see
diagram on previous page), follow the red arrow. First secure
this bracket screw (94) and then the other 3 bracket screws
(94).
EN
69