Routine Maintenance - La San Marco NEW 105 TOUCH Emploi Et Entretien

Once preset is complete, the display shows:
The display shows
To return to normal operation, turn the appliance off and on again.
after a factory preset, you will need to re-check and if necessary reset depending on your require-
ments all the appliance parameters (bar/technical/factory/coffee roaster), including the relevant pass-
words (except for the factory one which is fixed).
the factory preset also resets all counters, including the total doses dispensed.
7.8 Procedures in the event of a power failure
In the event of a power failure, when the power returns the dosage function returns to the status (IDLe-ON or
OFF) it was in at the time of the power failure.
Any dispensing in progress will be aborted.
All the dosage data remains stored.

8. Routine maintenance

• No panel or fixed guard of the appliance body may be removed from the it to carry out
the routine maintenance.
• Do not use harsh or harmful detergents such as alcohol, petrol or solvents to clean the
coffee machine; use water and neutral detergents.
Note:
Daily cleaning operations must be carried out in order to maintain the efficiency of the appliance and to guar-
antee the safety of the user and of people.
8.1 Cleaning the dispensing units and the filter cup
1) Detach the filter cup from the serving unit, remove the coffee grounds and replace the filter present with
the blind filter (without holes) provided with the machine.
2) before cleaning the unit, fit the protection on the cup as shown in the photo.
Note:
The filter is pressed into the cup; to remove it, simply force it on the sides and then extract it. Do not remove
the elastic ring on the inside of the filter cup.
3) Using the brush, clean the seat in the unit in which the filter cup is inserted.
4) Insert the cup in the unit and, without latching it completely, press the continuous flow button.
5) Let water overflow from the filter holder. (This will clean the serving group).
78
PRESS SiMUltanEoUSlY in on StatUS
Preset of values
complete
Correct alignment