Technical Characteristics - La San Marco NEW 105 TOUCH Emploi Et Entretien

the presenceof small quantities of water on the keyboard do not spontaneously activate the keys. Instead,
large amounts of water that may condensate on the surface of a touch keyboard or jets of water or vapour
directed towards the keyboard could cause the spontaneous activation or blocking of the keyboard. In this
case, switch the main switch from On to Off and then immediately from Off to On: this operation requires
approx. 1.5 seconds. In order to avoid large accumulations of water on the keyboard, it is recommended to
wash the push-button panel with the machine turned off and then dry it before turning the machine back on.
• In case of malfunctions or failure of any machine component, contact the authorized service centre and
request original La San Marco spare parts. The use of any other than original spare parts voids the con-
formity certifications and the warranty that accompany the machine.
• Any changes carried out on the machine and/or failure to carry out the scheduled maintenance will release the
Manufacturer from any liability for any resulting damages and voids the conformity declaration and the warranty.
• In case of malfunctions or failure of any machine component, contact the authorized service centre and
request original La San Marco spare parts. The use of any other than original spare parts voids the con-
formity certifications and the warranty that accompany the machine.
• Any changes carried out on the machine and/or failure to carry out the scheduled maintenance will release the
Manufacturer from any liability for any resulting damages and voids the conformity declaration and the warranty.
• Unauthorised operations or operations whose methods of execution are not exactly clear or unauthorised
interventions on the machine are strictly prohibited; contact the manufacturer for any information, spare
parts or accessories that you may need.
• Should the appliance be moved outdoors or to premises where the temperature might drop below 0°C, it
is vital that the exchangers circuit be emptied, cutting off the water supply to the appliance and draining
all water from the units until they only emit steam. Omitting to perform this procedure could lead to the
exchangers breaking, due to the water inside them freezing.
• For a proper disposal of the machine when it is to be discarded, contact the supplier or the authorized
firms specialized in the collection and disposal of solid urban waste. Do not discard the appliance in the
environment.

2. technical characteristics

Models
N° of brewing units
N° of steam wands
N° of hot water wands
Boiler capacity
Net weight
Width
Height
Depth
Single-phase absorbed power:
Three-phases power
consumption:
Cup warmer
Internal motor pump
External motor pump (optional)
48
NEW 105 T 2 NEW 105 T 3 NEW 105 T I 2 NEW 105 T I 3
2 3
2 2
1 1
12 L 19 L
62 Kg 81 Kg
790 mm 1030 mm
515 mm 515 mm
535 mm 535 mm
3500/4500 W 5500 W
3500/4500 W 5500/7000 W
100 W 125 W
275 W 275 W
300 W 300 W
2 3
2 2
1 1
12 L 19 L
63 Kg 82 Kg
790 mm 1030 mm
535 mm 535 mm
535 mm 535 mm
3500/4500 W 5500 W
3500/4500 W 5500/7000 W
100 W 125 W
275 W 275 W
300 W 300 W
NEW 105 T H 2 NEW 105 T H 3
2 3
2 2
1 1
12 L 19 L
67 Kg 83 Kg
790 mm 1030 mm
610 mm 610 mm
535 mm 535 mm
3500/4500 W 5500 W
3500/4500 W 5500/7000 W
100 W 125 W
275 W 275 W
300 W 300 W