Videotec ULISSE2 Manuel D'instructions page 57

PROBLEM The system log displays the error
message: MicroSD...
CAUSE The system is not able to manage the
micro SD installed.
SOLUTION Check the compatibility of the
micro SD with the system. In case of
malfunction, replace the micro SD.
PROBLEM The system log displays the Error
on heater hardware, Error on
demist hardware and Error on fan
hardware errors.
CAUSE The system does not correctly detect
the main slider in the housing.
SOLUTION Check that the main slider is installed
correctly.
MNVCU2_2222_EN
PROBLEM The software interface displays the
following message:
CAUSE Incorrect camera connection or
configuration.
SOLUTION Check the camera power and
Ethernet cables. Make sure the
camera pre-configuration and the
device hardware configuration have
been completed.
CAUSE Incorrect configuration of the camera
ONVIF protocol.
SOLUTION Check the ONVIF protocol and camera
access credentials are all enabled.
55