4.3 Product marking
Pan & tilt devices have a label complying
with CE markings.
Fig. 2
The label shows:
• Model identification code (Extended 3/9 bar code).
• Supply voltage (Volt).
• Frequency (Hertz).
• Current consumption (Amps).
• Protection degree (IP).
• Serial number.
4.3.1 Checking the markings
Before proceeding further with installation, make
sure the material supplied corresponds to the order
specification by examining the marking labels.
Never, under any circumstances, make any changes
or connections that are not shown in this handbook.
Improper use of the appliance can cause serious
hazards, risking the safety of personnel and of the
installation.
MNVCU2_2222_EN
5 Versions
5.1 Germanium window
The version with germanium window has been
developed for applications with thermal cameras.
Fig. 3
11