Fitting The Illuminator On The Bracket - Videotec ULISSE2 Manuel D'instructions

8.7.2 Fitting the illuminator on the
bracket
Place the fixings of the illuminator (01) on those of
the bracket (02).
02
02
Fig. 46
MNVCU2_2222_EN
01
01
Align the illuminators to the camera, to disperse as
little light as possible.
Screw in the screws and washers supplied with the
illuminator.
Fig. 47
Pay attention to the fixing. Tightening
torque: 6Nm.
29